Copper Plumbing Tube

Copper Plumbing Tube

Plumbing tubes are manufactured in compliance to BS 2871, Part 1 now superseded by the new European standard EN:1057 for Water, Gas and Sanitation .The BS 2871 specifies 3 wall thickness suitable for hot and cold water installations under Table X, Y & Z (the tables can be downloaded from our web site). Table ‘X’ is the table normally used for plumbing and gas. Tubes are 100% eddy current tested. Mechanical and chemical properties meet the standards of BS 2871, Part 1:1971 or the EN:1057 Tube sizes range from 12 mm to 159 mm. The standard plumbing sizes are (in mm): 15, 22, 28, 35, 42, 54, 66.7, 76.1, 108, 133 & 159.  These include types K, L, M and DWV. All tubes supplied to these ASTM standards are a minimum of 99.90 percent pure copper.

 

These classes and types of tubes are commercially available in the tempers and lengths described in the Plumbing tube product range chart. Types K, L, M and DWV are designated by ASTM standard size, with outside diameter always 1/8" larger than the standard size. Each type (K, L, M and DWV) represents a series of sizes with different wall thickness. The inside diameter depends on tube size and wall-thicknesses.

 

All four types are available in drawn temper straight lengths 20 feet long. Type K, L and M are available also in annealed temper in 8 feet straight lengths or in long coils in sizes from 1/4 inch to 7/8 inch. We in India, manufacture plumbing tubes to meet specifications established by the American Society for Testing and Materials (ASTM).

 

Advantages of copper plumbing Leak Proof:

1. Completely leak proof, copper pipes require no threading.
2. Owing to the corrosion resistant property of copper, our copper plumbing is resistant to corrosion and hence the water carried through the pipes also does not change colour as it does in the case of Galvanized Iron Pipes.
3. Our copper plumbing pipes are easy to install via soldering/ brazing process.
4. Our quality copper plumbing system has a longer & durable life. They last up to 50 years.

 

Technical Specification

Nominal or Standard Size, in.	Outside Diameter, in.	Average Outside Diameter A Tolerance,in		Wall Thickness and Tolerances, in.						Theoretical Weight,lb/ft
				Type K		Type L		Type M
		Annealed	Drawn	Wall	Tolerance B	Wall	Tolerance B	Wall	Tolerance B	Type K	Type L	Type M
				Thick-ness		Thick-ness		Thick-ness
¼	0.375	0.002	0.001	0.035	0.0035	0.03	0.003	c	c	0.145	0.126	c
⅜	0.5	0.0025	0.001	0.049	0.005	0.035	0.004	0.025	0.002	0.269	0.198	0.145
½	0.625	0.0025	0.001	0.049	0.005	0.04	0.004	0.028	0.003	0.344	0.285	0.204
⅝	0.75	0.0025	0.001	0.049	0.005	0.042	0.004	c	c	0.418	0.362	c
¾	0.875	0.003	0.001	0.065	0.006	0.045	0.004	0.032	0.003	0.641	0.455	0.328
1	1.125	0.0035	0.0015	0.065	0.006	0.05	0.005	0.035	0.004	0.839	0,655	0.465
1¼	1.375	0.004	0.0015	0.065	0.006	0.055	0.006	0.042	0.004	1.04	0.884	0.682
1½	1.625	0.0045	0.002	0.072	0.007	0.06	0.006	0.049	0.005	1.36	1.14	0.94
2	2.125	0.005	0.002	0.083	0.008	0.07	0.007	0.058	0.006	2.06	1.75	1.46
2½	2.625	0.005	0.002	0.095	0.01	0.08	0.008	0.065	0.006	2.93	2.48	2.03
3	3.125	0.005	0.002	0.109	0.011	0.09	0.009	0.072	0.007	4	3.33	2.68
3½	3.625	0.005	0.002	0.12	0.012	0.1	0.01	0.083	0.008	5.12	4.29	3.58
4	4.125	0.005	0.002	0.134	0.013	0.11	0.011	0.095	0.01	6.51	5.38	4.66
5	5.125	0.005	0.002	0.16	0.016	0.125	0.012	0.109	0.011	9.67	7.61	6.66
6	6.125	0.005	0.002	0.192	0.019	0.14	0.014	0.122	0.012	13.9	10.2	8.92
8	8.125	0.006	0.002	0.271	0.027	0.2	0.02	0.17	0.017	25.9	19.3	16.5
			-0.004
10	10.125	0.008	0.002	0.338	0.034	0.25	0.025	0.212	0.021	40.3	30.1	25.6
			-0.006
12	12.125	0.008	0.002	0.405	0.04	0.28	0.028	0.254	0.025	57.8	40.4	36.7
			-0.006

 

Copper Tubes are specified in the BS 2871 / EN 1057 in three wall thicknesses designated under Table X, Y & Z. As per the specification the wall thicknesses recommended & the calculated working & burst pressures are given below:

 

TABLE 'X'
Tube Size	Outer Dia.		Thickness	Inner Dia.	Calculated Burst Pressure		Maximum Working Pressure
	max.	min.
mm	mm	mm	mm	mm	bar	PSI	bar	PSI
15	15.045	14.965	0.7	13.6	240	3480	58	841
22	22.055	21.975	0.9	20.2	215	3117.5	51	739.5
28	28.055	27.975	0.9	26.2	165	2392.5	40	580
35	35.07	34.99	1.2	32.6	175	2537.5	42	609
42	42.07	41.99	1.2	39.6	145	2102.5	35	507.5
54	54.07	53.99	1.2	51.6	110	1595	27	391.5
67	66.75	66.6	1.2	64.6	105	1522.5	20	290
76.1	76.3	76.15	1.5	73.1	100	1450	24	348
108	108.25	108	1.5	105	70	1015	17	246.5

 

TABLE 'Y'
Tube Size	Outer Dia.		Thickness	Inner Dia.	Calculated Burst Pressure		Maximum Working Pressure
	max.	min.
mm	mm	mm	mm	mm	bar	PSI	bar	PSI
15	15.045	14.965	1	13	360	5220	87	1261.5
22	22.055	21.975	1.2	19.6	290	4205	69	1000.5
28	28.055	27.975	1.2	25.6	230	3335	55	797.5
35	35.07	34.99	1.5	32	225	3262.5	54	783
42	42.07	41.99	1.5	39	190	2755	45	652.5
54	54.07	53.99	2	50	195	2827.5	47	681.5
67	66.75	66.6	2	63	157	2276.5	37	536.5
76.1	76.3	76.15	2	72.1	140	2030	33	478.5
108	108.25	108	2.5	103	120	1740	29	420.5

 

TABLE 'Z'
Tube Size	Outer Dia.		Thickness	Inner Dia.	Calculated Burst Pressure		Maximum Working Pressure
	max.	min.
mm	mm	mm	mm	mm	bar	PSI	bar	PSI
15	15.045	14.965	0.5	14	260	3770	50	725
22	22.055	21.975	0.6	20.8	215	3117.5	41	594.5
28	28.055	27.975	0.6	26.8	165	2392.5	32	464
35	35.07	34.99	0.7	33.6	155	2247.5	30	435
42	42.07	41.99	0.8	40.6	145	2102.5	28	406
54	54.07	53.99	0.9	52.2	130	1885	25	362.5
67	66.75	66.6	1	65	120	1740	20	290
76.1	76.3	76.15	1.2	73.7	80	1160	19	275.5
108	108.25	108	1.2	105.6	75	1087.5	17	246.5